CONCRETE REPAIR & PROTECTION

• Controls Corrosion and Improves Adhesion
• Better bonding strength
• Fully compatible with PCC repair system

Approximately 1.5

Kg /m² /coat

30 Kg sacks

2 Kg Pouch

• Corrosion inhibitor coat in repair system
• Suitable for steel construction and metals
• For use in corrosive environments

Mixing

Resin: Hardener 3:1

Consumption

Approximately 100 to

300 g/m²

Resin

30 Kg pails

5 Kg pails

Hardener

5 Kg pails

1 Kg bottle

• Non shrink fine mortar
• Excellent adhesion to Surfaces

Approximately 1.5

Kg/m²/mm thickness

30 Kg sacks

2 Kg Pouch

• High Bonding Strength and Good Flexural Strength
• Labor saving and therefore Economical
• Repair of honeycombed, spalled concrete and damaged structures
• Mortars for precast connections bearing / foundation pads

Approximately 2000

Kg/m³ of volume

30 Kg sacks

• Improves compressive and flexural strengths
• Reduces the shrinkage cracks and surface crazing
• Saponification resistant

5.0 to 20.0% by weight

of cement or depending

upon application

30 Kg pails

5 kg pails

• For production of polymer modified mortars
• Does not get affected by Ultra Violet Rays
• Suitable for waterproofing of basement, sunken slab of toilets, terraces, roofs etc.

5.0 to 20.0% by weight

of cement or depending

upon application

30 Kg pails

5 kg pails

• Manual application by trowel or float
• Wet spray application
• Excellent adhesive properties

Approximately 1.7

Kg/m2/mm thick

30 Kg pails

+

Primex 250

Liquid Primer

• Crack Bridging coating for strained facades and concrete surfaces
• Resistant to carbonation
• Seamless membrane with breathing capacity
• Water repellant
• Weathering and ultra violet (UV) resistant
• Solvent free, safe and non-corrosive

EmceColor-Flex:

Approximately 300 to

450 g/m²/coat

Primex 250:

Approximately 75 to

100 g/m²

EmceColor-flex:

40 Kg pails

5 kg pails

Primex 250:

30 Kg pails

5 Kg pails

1 Kg bottle

+

Primex 250

Liquid Primer

• Solvent-free acrylate-based coating sytem
• Low resistance to water vapour diffusion (Breathable)
• High resistance to carbon dioxide diffusion (Anti Carbonation)
• Very good weather resistance - UV Resistant
• Non-yellowing
• Easily recoatable for future aesthetics

Betonflair W:

Approximately 200 to

250 g/m²/coat

Primex 250:

Approximately 75 to

100 g/m²

Betonflair W: 40

5 kg pails

Primex 250:

30

5 Kg pails

+

Liquid Primer

Emcephob SX

• Highly weather and UV resistant
• To be used as carbonation resistant coat
• As a protective coating system on facades in heavily polluted industrial areas

Betonflair CT:

Approximately 200 to

250 g/m²/coat

Emcephob SX:

Approximately 75 to

100 g/m²

Betonflair CT:

40 Kg pails

5 kg pails

Emcephob SX:

30 Kg pails

5 Kg pails